LED Fixtures
/ Utility Flood Lighting
UFB3 Utility Flood Gen3 LED Flood / Area Light
LED utility flood and area light designed to replace 250W and 400W HID flood lights.
Product Overview
The SALCO UFB3 Utility Flood Gen3 is an LED energy-saving, cost-effective flood and area lighting solution designed to replace 250W and 400W HID (HPS and MH) flood lights. Factory-set nominal input power is available from 60W through 200W in 10W increments, with adjustable output options.
Applications
Flood lighting and area lighting
utility applications
Key Features
✓
Heavy-duty die-cast aluminum housing
✓
durable powder coat finish
✓
stainless-steel hardware
✓
thumb-screw entry
✓
14-6 AWG terminal block
✓
pre-wired 7.5-ft 14/3 SJTW cord
✓
wrap-around yoke or slip-fitter mounting
✓
IP66 fixture and optics
✓
self-cleaning heat sink
✓
20kV/10kA surge protection
✓
7-pin photocontrol receptacle
✓
0-10V dimming
✓
factory-set nominal power options
Specifications
Model: UFB3; programmed nominal input power P06-P20, 60W-200W; drivers: 120-277V 0-10V dimming, 347-480V 0-10V dimming, or DALI 120-277V; Type 6x6 optics; 3000K or 4000K CCT; mounting options include large yoke with external cord, 2-3 inch tenon slip-fitter knuckle with internal wiring, or external cord; bronze or gray housing; 20kV/10kA surge protection standard; 7-pin photocontrol receptacle standard; no-controls, shorting-cap, or long-life fail-on/fail-off photocontrol options; adjustable output unit A1-A8; dimensions 14.3 x 12.2 x 4.8 inches; weight 15 lb; EPA 1.7 at 90 degrees from nadir and 1.1 at 0 degrees. Performance range is 60W to 200W, with 4000K standard output up to 28,000 lumens at P20.
Need More Information?
Contact SALCO to learn more about this product or discuss your application.
Contact SALCO