LED Fixtures
/ Utility Flood Lighting
UFB2 Utility Flood Gen2 LED Flood / Area Light
LED utility flood and area light designed to replace 250W, 400W, and 1,000W HID flood lights.
Product Overview
The SALCO UFB2 Utility Flood Gen2 is an LED energy-saving, cost-effective flood and area lighting solution designed to replace 250W, 400W, and 1,000W HID (HPS and MH) flood lights. It provides factory-set output options in nominal 10W increments for customization of wattage and lumen output.
Applications
Flood lighting and area lighting
utility applications
Key Features
✓
Heavy-duty die-cast aluminum housing
✓
durable powder coat finish
✓
stainless-steel hardware
✓
thumb-screw entry
✓
14-6 AWG terminal block
✓
pre-wired 7.5-ft 14/3 SJTW cord
✓
wrap-around yoke or slip-fitter mounting
✓
IP66 fixture and optics
✓
self-cleaning heat sink
✓
20kV/10kA surge protection
✓
7-pin photocontrol receptacle
✓
0-10V dimming
✓
adjustable factory-set output options
Specifications
Model: UFB2; maximum 300W and 40,800 lumens; drivers: 120-277V 0-10V dimming or 347-480V 0-10V dimming; Type 7x7 optics; 3000K or 4000K CCT; mounting options include large yoke with external cord, 2-3 inch tenon slip-fitter knuckle with internal wiring, or 2-3 inch tenon slip-fitter knuckle with external cord; bronze or gray housing; 20kV/10kA surge protection; 7-pin photocontrol receptacle; no controls, shorting cap, or long-life fail-on/fail-off photocontrol options; adjustable or programmed output options; dimensions 18.7 x 16.6 x 6.5 inches; weight 28 lb; EPA 2.8 at 90° from nadir and 1.4 at 0°.
Need More Information?
Contact SALCO to learn more about this product or discuss your application.
Contact SALCO